Thread: Removal of broken bolts/studs-new idea??

Tweet

the wax ring is a old trick that i learned some time ago have posted on here many times . i like to most all the time drill them out with a ball mill getting on center is the trick . i drill to almost the size of the stud or bolt and drill past it till you hit bottom if blind hole or drill out if open first sometimes the heat and wax if rust i give them a good blast with a hammer . i have built up weld on the busted stud or bolt this works some times on small stuff. then grab with a vise grips . alot of time if lock in from rust coring them out works the best for me and i like using the EZ out that looks like a flat tooth pick. i get alot of busted stuff .in the shop most the time ex bolts in alum heads and i get stuff were guys have used to small of a EZ out and snap them off to