I know there's a lot of info on this site regarding this subject, but I have
run into one I haven't experienced before. Have 1980 Chev pk up trk, been
sitting for two yrs. Replaced front calipers, and rear drums. Also replace
the tee and hose feeding the rear breaks. Noticed no fluid when I disconnected old Tee. Tried bleeding brakes the old way with two people.
only got fluid in one caliper. Put on new primed master cylinder, still no
luck. No fluid at one caliper and none at all in the rear. Is it possible that
I just need to put in new lines all the way around, or maybe trying to blow
them out real good. I've never seen this before, just sounds like lines are
stopped up...What do you guys think?