Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: M & H slicks on the street w/ out tubes???
          
   
   

Results 1 to 8 of 8

Threaded View

  1. #3
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i would not run slicks on the street i have at one time ,but there better ways to go now . with that said .you ask about the tubes .you do not need them but you may find your slicks leaking down so every now and then putting air in them. so yes i agree .i do not think you have to drill the rim if the tubes have no valve stem locks on them but could spin and take the tube out what i used was a non race tube on my small set of slicks . on my big set 19x33 i stop using tubes when i ran over a nail and spilt the race tube after that no tubes
    Last edited by pat mccarthy; 09-14-2010 at 04:00 AM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink