Hybrid View
-
08-12-2010 10:32 PM #1
Oil ??
I have a Borg Warner T-10 that I just installed in my Hemi Ford truck. Was wondering if anyone knows for sure what oil to use. Seems like these old 4 speeds used 90w gear lube, but I'm just not sure. Anyone know??
RolandProtected people will never know or understand the intensity life can be lived at. To do that you must complettly and totally understand the meaning of the word "DUCK"
-
08-12-2010 11:08 PM #2
in my 0ld GMs i used 90wIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
08-12-2010 11:15 PM #3
Yep, the new stuff reads 80-90, but it is what I use in the transmission in my 27.
Don
-
08-13-2010 12:42 AM #4
Thanks Pat and Don I thought that was correct but just wasn't too sure. Figured you guys would come to my rescue. Thanks again
RolandProtected people will never know or understand the intensity life can be lived at. To do that you must complettly and totally understand the meaning of the word "DUCK"
-
08-13-2010 01:20 AM #5
try to find GL-4 gearlube as gl-5 is corrosive towards the brass. i remember reading 3 or 4 forums on this subject on muncies and BW t-10's
-
08-13-2010 02:42 AM #6
Are they still scraping oil up of the beaches,you may be able to get some really cheap with free additives to lube your gearingbox so that it has that gear drive sound to it. Just imagine you could start a new trend, gear drive whine from the motor, a nice whine from your gearbox followed by the whine from your quickchange, just wear earmuffs for those longer trips.
I maybe a little crazy but it stops me going insane.
Isaiah 48: 17,18.
Mark.






LinkBack URL
About LinkBacks
Reply With Quote
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year