Quote Originally Posted by rspears View Post
So are you saying that the kingpin bushings are loose in the axle bores? Unless I misunderstand, the axle is bored to fit the bushings, the bushings are pressed into the axle bores, and then the kingpin bushings are align bored with an adjustable reamer to fit the kingpin into the axle. What is loose?
The bushings are pressed into the spindle portion, not the axle itself. the kingpin is a close, but not press, fit in the axle and secured in the axle by a cross bolt so the pin can't (not suppose to) move in the axle. however my axle hole is worn such that it does slop around quite a bit.

Lot