Thread: 6 cylinder FED

Tweet

Thanks for all the info everyone, I am about to try and get a Clifford Preformance Parts catalog to see what available. I don't think my welding skills are strong enough to built a frame now that I'm looking at some of the dragsters in the photos.(thanks Itoldyouso)I will maybe look for a roller. Would like to run at the Motor Speedway in Englishtown Nj in the spring. Hopefully I will be ready by them.

Before you buy a used frame check out these guys. For the money you get a lot of good fabrication.

http://www.slingshotdragsters.com/kits.html

Problem with a used chassis is that it may not meet current regulations, especially in the roll bar construction. Many changes have been made in what the racing organizations require. It is not impossible to bring an older frame up to current specs but it is not exactly easy either.

Don

Originally Posted by Itoldyouso

Before you buy a used frame check out these guys. For the money you get a lot of good fabrication.

http://www.slingshotdragsters.com/kits.html

Problem with a used chassis is that it may not meet current regulations, especially in the roll bar construction. Many changes have been made in what the racing organizations require. It is not impossible to bring an older frame up to current specs but it is not exactly easy either.

Don

I was just on this site, I am really liken that you can run in the 9's with a 285 hp motor.