J. Robinson, you will not regret it. You will wish you found them a long time ago and never use the DA on 80 grit to strip again. Now it is good once it's back to bare metal to hit it with 80 grit on a DA to smooth the metal out and finish it off with epoxy primer.
Also, I do not recommend aircraft stripper. If used properly it is fine but if you leave the slightest bit on the car then your paint job will go to hell quickly. The stuff is very hard to get out of cracks, joints and corners and will ruin your paint job quickly. Plus the stuff is messy and takes forever to clean up. I do not like cleaning bare metal with soap and water either even if you completely dry it but that is just me.