Thread: Rearview mirror mounting button

Tweet

I've seen several references to applying heat with a hair dryer or a heat gun on low setting while gripping the base with pliers, applying a slight twisting motion. No open flame - too much heat too fast. Acetone is also mentioned as an alternative, and that is the "special solvent" they sell in the auto departments - paper towel below, acetone above to let it seep into the joint like penetrating oil.

Originally Posted by rspears

I've seen several references to applying heat with a hair dryer or a heat gun on low setting while gripping the base with pliers, applying a slight twisting motion. No open flame - too much heat too fast. Acetone is also mentioned as an alternative, and that is the "special solvent" they sell in the auto departments - paper towel below, acetone above to let it seep into the joint like penetrating oil.

I think I'll try the heat gun set at low first. If that doesn't work, I'll try the acetone. I hate to use acetone because it can really mess up the dash if it happens to drip. I'll cover everything real good if it come to that.

This is a Honda Ridgeline and I assume it is glued on.

thanks guys.