Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: S10 rear end in fendered '29 Model A?
          
   
   

Results 1 to 10 of 10

Threaded View

  1. #7
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    I think this one is stock. It was one of my Ebay purchases some time ago so I forget the specifics. I am going to have to replace it at some future date as it has settled lower than I planned on and the shackles are now straight down, not angles as the should be.

    I also have a T spring that I am using under my 27 on an A frame. That one I did have to have a new, shorter main leaf built for. I did that about 20 years ago and they charged me $ 18 to make the new leave. A year or so ago I went back to the same spring shop and had a shortened main leave made for my 39 Dodge project. This time the charge was $ 118.00! Inflation I guess.

    Wish I could tell you more about the spring on the S10 rear, but that is all I remember. If you would like I will be at the shop tonight and measure it for you. The picture below is of the T spring under my 27.

    Don
    Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink