Thread: '76 Torino Door Glass

Tweet

you do not have to use pop rivets they use pop rivets there fast to use the alum split fast were steel could hurt mounting hard ware . i have put them back on with 1/2 20 bolts from the hard ware store with a lock washer or lock nut .you center puch the center out of the rivets and drill out make sure you put a deep well socket or something to make a drill stop so you do not hit the 1/4 panle with the end of the drill bit ....makes i nice dent in you sheet metal

Originally Posted by pat mccarthy

you do not have to use pop rivets they use pop rivets there fast to use the alum split fast were steel could hurt mounting hard ware . i have put them back on with 1/2 20 bolts from the hard ware store with a lock washer or lock nut .you center puch the center out of the rivets and drill out make sure you put a deep well socket or something to make a drill stop so you do not hit the 1/4 panle with the end of the drill bit ....makes i nice dent in you sheet metal

Pat,
Very good advice that I will pass on. Your 1/4 panel comment brought a chuckle.