Thread: cleaning blocks
-
08-04-2009 07:40 PM #1
cleaning blocks
went down to my local machine shop.whats going on,he said that they do not hot tank engine parts anymore epa regulations. he told me to put the block in the oven and heat it up.then scrub it down.ok. is this a problem around the country or just local regs.? it's been a while since i needed a machine shop and when i lived in va. had access to a fully equipmented shop after hours.
no matter how fast you are you can find someone who is a little faster.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-05-2009 04:48 AM #2
The good ole EPA put a stop to hot-tanking over a year ago, at least where I live, and probably everywhere else.
My machine shop guy used some other procedure (I forgot what it was) on a block I took to him. I'm pretty sure heating it up first was part of the treatment. He said the hot tank did a better job but you do what you gotta do.
Pat McCarthy will know about this.
Jim
Two men out hunting came upon a huge hole in the ground and were amazed at the size of it. "Wow, that's a huge hole; wonder how deep it is?" " I don't know. Let's throw something down and listen to...
the Official CHR joke page duel