Thread: 34 ford 3W body mounts
Results 1 to 3 of 3
LinkBack URL
About LinkBacksThreaded View
-
08-02-2009 01:46 PM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
Up through '36 there weren't body mount pads as such, what was factory was an oiled woven strip that was combined with metal shims, it measures a nominal .125 thick. The '37-40 kit is made of 31 individual rubber pads, sized depending on location, most are .250 thick, several at .375, and a few for special locations that are thicker. If you want to come to the shop this week I can show you both types, I've got a complete '39-40 kit, though not specific to the model 40 the frames are pretty similar. I'll be headed for B'ville Friday, but earlier would work fine.Last edited by Bob Parmenter; 08-02-2009 at 01:53 PM.
Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!