Glenn, I think you have helped solve my problem as I have nothing else hooked up yet other than the clutch spring...I already had your diagram, but
there is also another one at tri five library that shows the long stem of the
spring being hooked into a plate about 1 1/2 in long...this plate then slides
over the lever assembly bracket which has a grove in it..This is the way I
have it hooked up now....Also, what is not shown is, there is a small rod
running thru the channel towards the dash with a hook on it..This is where
I hooked the short end of the spring...................If you have any other
coments, let me know, but I think the fact that the whole assembley is
not together yet may make the difference....Thanks R. Dobbs