Results 1 to 15 of 17
LinkBack URL
About LinkBacksThreaded View
-
06-08-2009 10:35 AM #5
CHR Member
- Join Date
- Sep 2007
- Location
- UPSTATE New York
- Posts
- 4,336
This is a piece of 4" X 2.25 OD exhaust tubing projecting through the toeboards and welded in place. It's fitted to a standard IDIDIT 2" OD column. The nuts welded on each side have set screws to hold the column in place. The only caution - if you use this, weld slowly as you can distort that piece of tubing ( speking from experience.
The first photo is in-progress, the second is from when I did the next to final assembly (the final asssembly was 2 days later AFTER I repainted the column
to fix the scratches
)
Last edited by IC2; 06-08-2009 at 10:41 AM.
Dave W
I am now gone from this forum for now - finally have pulled the plug
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Either return this forum to what was or get the HELL OUT!
Dead!