Thread: Need a suggestion

Tweet

if its sealed you will not see moisture .the epoxy and glass will work just fine over steel he is fixing hole and missing parts that would not fix ez ? i think that what he said if clean good seal from both sides if holes or missing parts .have done it many times . as far is water they do make boats out of glass and do flex ? i would not do a glass fix on the out side of a steel car the glass/ resin moves at a dif rate then steel in the sun =heat you will see i line . steel to steel is better but for what vara4 is going to do it will work good. one thing i have seen and did at one time is over use of resin . the resin is in it self not very strong it the cloth or mat so you only use a small amont to wet the cloth or mat. all body filler and some primer fillers are base off resins the same make up as the cheaper fiber resins and they stick to the out side of cars. the epoxys are up to the job like the west systems if prep is right. it well make a good sound repair that will last for manys years if done right