Thread: Vacuum Advance Chatter?
-
04-21-2009 10:52 PM #1
Vacuum Advance Chatter?
At idle, my HEI distributor is "chattering." Seems as it may be a vacuum supply problem to the advance? Problem came along with the Thumpr cam installation. No other problems. Motor runs fine. Anyone ever experienced this? Is there a simple solution?Leo Life is not measured by the breaths you take, but by the RODS that take your breath away.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-22-2009 04:24 AM #2
It started with the cam installation? Are you running a billet cam? They require a bronze dist. drive gear. Steel gear on billet cam will wear quickly, and may "chatter" as it goes away.
-
04-22-2009 07:36 AM #3
I have the melonized distributor gear, approved by Comp Cams for their steel cams.Leo Life is not measured by the breaths you take, but by the RODS that take your breath away.
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel