Thread: I need a new brake light switch!!!

Tweet

Originally Posted by Dave Severson

I use the two wire switch that is pressure actuated and can be tee'd into the brake line anywhere.... Cleaner setup, and one less thing to mess with under the dash! I get mine at NAPA, super cheap deal, easy to install.

While doing my search prior to installing one of these switches I found this thread . The way my plumbing is laid out it will be easiest for me to put the switch right after my MC and before the residual valve . It will be on the front brake side of MC . Will this work OK ?

Originally Posted by luckyfasteddie

While doing my search prior to installing one of these switches I found this thread . The way my plumbing is laid out it will be easiest for me to put the switch right after my MC and before the residual valve . It will be on the front brake side of MC . Will this work OK ?

Yes - good as any place

Originally Posted by IC2

Yes - good as any place

Thanks for the info