Results 1 to 2 of 2
LinkBack URL
About LinkBacksHybrid View
-
03-15-2009 01:12 PM #1
CHR Member/Contributor
- Join Date
- Jun 2006
- Location
- Dallas
- Car Year, Make, Model: 1951 Chevy 3600 3/4 Ton 350/330 700R4
- Posts
- 161
Trying to mock-up fenders and...
51 Chevy pickup
My driver's side fit pretty well but when I tried to fit up the passenger's side I found that the three main holes on the cowl are about 1/4" off and I can't seem to twist, raise, lower the fender to make it fit. I had the inner and outer replaced on both sides so I don't know the best way to solve the problem and still have the front end correct.
__________________
http://community.webshots.com/album/556111970egYVwn1951 Chevy 3600 Long Box
-
03-15-2009 06:27 PM #2
CHR Member
- Join Date
- Oct 2007
- Location
- Petaluma
- Car Year, Make, Model: 48 Ford F1
- Posts
- 9,795
John I just perused your photos. What a great job you've done! On the fenders can you redrill the holes in the fender to align with the bed bolts?
Also it looks like that may have been in an old navy store at one time? Nice project post some pics here." 
"No matter where you go, there you are!" Steve.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year