-
03-12-2009 08:01 PM #1
help with radiator crossmember 40 chev
anybody know the measurements and dimensions for a radiator support when running mustang II frontend? i know i can buy it, but it would be easy to make.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-14-2009 05:40 AM #2
talkative bunch. ok...i will ask another way. does anyone own an original 40 chev that will measure the radiator support for me?
-
03-14-2009 05:55 AM #3
do you have the radiator you want to mount?
-
03-14-2009 01:29 PM #4
yes. walker.why?
-
03-14-2009 01:31 PM #5
what i am looking for is the location of the holes from a reference point on the frame and the height of the support in relation to the bottom of the frame.
-
03-16-2009 10:54 AM #6
if someone could measure from the tip of the frame rail to the center of the holes where the radiator frame mounts with a framing square, that would be all i need. also i have a 42 to measure here, but i am unsure if they are the same.
-
03-16-2009 06:54 PM #7
nevermind. the position is 7.5" back from the front edge of the frame rail. about 1" down. maybe somebody else will need the info someday.
-
03-17-2009 10:51 AM #8
Hey Eddie, just so you know, the position is 7.5" back from the front edge of the frame rail, about 1" down.
-
03-17-2009 12:00 PM #9
couldn't have figured it out without the help from all of you.
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Moving on to next phase of frame reconstruction . Due to the Trans location I need to build a new center section for the X member. 1st cuts have been made . [/URL] I will use this 6"dia. ...
New Project