Thread: help with radiator crossmember 40 chev

Tweet

yes. walker.why?

what i am looking for is the location of the holes from a reference point on the frame and the height of the support in relation to the bottom of the frame.

if someone could measure from the tip of the frame rail to the center of the holes where the radiator frame mounts with a framing square, that would be all i need. also i have a 42 to measure here, but i am unsure if they are the same.

nevermind. the position is 7.5" back from the front edge of the frame rail. about 1" down. maybe somebody else will need the info someday.

Hey Eddie, just so you know, the position is 7.5" back from the front edge of the frame rail, about 1" down.