Hey Guys; I had posted this on Itoldyouso's thread, But figured I'd move it over here to show some of my progress along with some of my pains!!!

I took a cutting torch to the front of my 65 Ranchero yesterday,after raising the front end up in the air on blocks. Left the top 1 inch down the sides to save the radiator and
head light supports. I couldn't figure out why the thing was not dropping to the ground after cutting all the way thru both sides of the frame. So I reached out and grabbed the
radiator and head light support and pulled out on it. It was then that the frame, old suspension and sheet metal reached out and grabbed my little finger. At this point some tearing or tarring was involved, so I thru my head forward to see just what was happening. Now it was at this point that my nose came in to contact with the same radiator and head light support. and thats how I got the big gash on the bridge of my nose. It was at this point that I found out why the front end was not dropping down like it should. It just needed a little blood to lubricate it. ( DANG IT!!! ) HE! HE! HE! Kurt