Thread: Welding sheet metal
Results 1 to 15 of 21
LinkBack URL
About LinkBacksHybrid View
-
01-16-2009 06:36 PM #1
CHR Member/Contributor
- Join Date
- Dec 2004
- Location
- TX
- Car Year, Make, Model: hotrod
- Posts
- 1,830
In really depends on your situation, in a perfect world this is how I would do it. I would butt weld it but leave a gap of a 1/32" and put a alum. brass or copper plate behind it to pull the heat away from the metal. Tack it up all the way down the seam keeping the tacks as far apart from each other as possible. Stop when you feel things are getting to hot and let it cool off. If you dont have the patience to do it right then you might want let some one else do it.Last edited by BigTruckDriver; 01-16-2009 at 07:08 PM.
Friends dont let friends drive fords!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!