Thread: 73 Mustang
Hybrid View
-
11-23-2008 04:03 PM #1
I could see what looks like a latch that does not move when I lift up the handle, however I'm not sure if the answer is to replace the entire handle or what.
-
11-23-2008 04:25 PM #2
Yup, if the actuating rod is still attached and you cannot open the door from outside of the car, then the door handle (actually a replacement for a 87/88 Towncar) needs to be replaced.
Originally Posted by dhawthorne15
Bill S.Instead of being part of the problem, be part of a successful solution.
-
11-23-2008 05:22 PM #3
The handle needs to be replaced,,they weren't too good but they are fairly cheap...They may still sell them in the "help" line at advance auto parts, they used to because it was such a common failure item and it fits a lot of fords..I remember when hot rods were all home made.
-
11-24-2008 03:58 PM #4
So just replacing the handle (the one piece from the outside) will fix the problem?






LinkBack URL
About LinkBacks
Reply With Quote

This site is up more often lately, but very little traffic.
Dead!