Thread: corrosion in coolant
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
10-15-2008 07:00 PM #1
CHR Member
- Join Date
- Sep 2005
- Location
- Hamilton
- Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
- Posts
- 3,900
corrosion in coolant
I've flushed the block on my 64 C 10 (350) several times, and I still have nasty coolant. Looks like red mud. Is there anything I can put in to stabilize the block and stop the rust?
Running 50-50 ( roughly ) coolant..
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-15-2008 07:44 PM #2
CHR Member
- Join Date
- Mar 2005
- Location
- Midland park
- Car Year, Make, Model: 48 Ford Conv,54 Ford Vict
- Posts
- 193
Each time you flushed it was it one right after the other? Or was it done after a few days or more between flushing? If the latter, antifreeze or a rust inhibitor should stop any rusting.
If the former, I have heard that using white vinegar will really clean out an engine block. Fill with the vinegar and run the car for a few days. Flush and they say it should be squeeky clean.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel