Results 1 to 10 of 10
LinkBack URL
About LinkBacksThreaded View
-
08-30-2008 04:59 PM #8
CHR Member
- Join Date
- May 2004
- Location
- Ashland
- Car Year, Make, Model: 29 fendered roadster
- Posts
- 2,160
Stovens, thanks for the link to the installation tutorial. As Tech1 says I just installed rubber flex hoses because I did not want to gamble on the coolflex hoses until I get things running. The rubber hoses do not look as good but are only about $12 to $15 each compared to the more expensive coolflex. The coolflex hoses do look neat and maybe cool better too but I will postpone that option for a while and get the car running with the rubber hoses. Maybe it was necessary to do the rubber hose option first because I already went through several cut-fit-try-another cycles to get my fan belt and hoses set up. I have braided lines for fuel and breather but I wonder how to clean them from grunge after a while?
Don Shillady
Retired Scientist/teen rodderLast edited by Don Shillady; 08-30-2008 at 05:12 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!