Thread: Evercoat Metal 2 metal?

Tweet

Update(which I posted on my project special k thread already, but thought it might be helpfull to someone using these products)
I took Dave's advice and put a small thin layer of metal 2 metal in the groove between the window and roof seem sheet metal. I then did the same thing on the inside of the cab seam(as it will be hidden by the roof liner, and it gives the external stuff someting to grab to. Next I forewent the fiber filler, due to the thinness of where it was going, and put a coat of Rage filler over the metal 2 metal. I then sanded, did a second coat, then hit all of the exposed surfaces with a sanders, and coated with three coats of one step rust converter. Here are a few shots. It's hard to see the metal 2 metal in the first few shots, but the stuff worked pretty slick!