Great ideas, guys. I know I can undo all the wire wraps around them that are now running across the top of the cab, over to the corner and down the side to the floor. That will give me LOTS of room to at least mark where the wire go thru the floor, then at least wrap them in tape or something for now.

I am going to see if I can pinch/squeeze/beg/curse them together tight enough that I can file or use a super fine dremmel tip and make the hole larger. Very slow and careful! I at least want to get a rubber grommet in that hole.

Best case scenerio I will be able to do all this without have to take 5 or 10 wires loose to gain enough room to work with.

Thanks for the tips!