The last two fuel tanks we built, we used stock GM in-tank pumps...you can buy them in either low pressure or high pressure models (either throttle body injection or high pressure injection). If you buy the AC part number, they are about $42 each. We put two in each tank and wire them separately so you can swap pumps if one fails. The fuel lines from the pump have check valves to prevent back flow from one pump to the other.

The pumps are submersed in gas so they are quiet...and run cool.

The only downside is that you have to have a large enough access hole to get them thru...maybe a 3 inch dia hole? We have a bigger hole since we used fuel cell foam and had to have room to stuff it.

mike in tucson