Quote Originally Posted by Matt167
I'll have to try the Evercoat glaze.. I was using the Napa brand laquer based glaze b4 this, the 3M acrylic based glaze is much better, dosn't shrink 1/2 as much.. Guy at Napa said they started carying the 3M instead because so many complained about the laquer stuff. They don't carry the Evercoat stuff, but I'm sure I can have them order it.

I guess it does make sense, that glazing putty is so much more expensive. it is a lot nicer to work with, spreads and sands much nicer and all..
There are two of them Matt, so be careful which one you use. One glaze is approved for use over bare metal, like to smooth out sanding scrathes, and the other is suggested to be used on either primed surfaces or other Evercoat fillers.... I use the Metal Glaze, it works on everything.....