Originally Posted by Don Shillady
IC2, Yes indeed it is great to see a message from DennyW! I have some of that loom stuff for the line to the windshield wiper to hide the wires on the roadster windshield frame. Maybe I can use it more for other things too. My real question here is for IC2. I am grunting down under the frame to fit in the tubing from the transmission to the cooler in the radiator after deciding it was not a good idea to have both the fuel line and the trans cooler under the running board apron. Soooo, I want to ask you where you put the wires to the front lights and turn signals and how? Now on the outside of the frame I have fuel line and inside the frame I have trans cooler tubing and hot headers. Maybe DennyW has the best idea to bundle that stuff under the frame but still away from the wheels. I will have to bring the wires up under the frame near the fuel pump (SBC) along the edge of the radiator shell about half way up until it gets to the grommet hole but it will be at least four wires on each side: high, low, turn and ground so it would be great if you have a picture of how you threaded the wires from the dash to the headlight bucket. Any related picture will be appreciated very much! I am sorry to be so trivial but I am between frustration and determination to not give up and finish this bigger-than-I-expected project. Holly Cow, every time I turn around it is time to make another bracket! I am thinking of putting mis-bent tubing fragments on the Christmas tree, what else! Hey, if I get going on the wiring soon I will have some multicolor wire too!
Don Shillady
Retired Scientist/teen rodder