Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: gas filler location??
          
   
   

Reply To Thread
Results 1 to 5 of 5

Hybrid View

  1. #1
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,898

    Dave, stock 35 and 6 owners are well versed in the problems of the low mounted fill. Here's a shot showing a typical outcome from acceleration with the stock setup in the first pic.

    35, the fill behind the plate thing would be discrete, I'd say you need to relocate the fill hole/pipe to the center back of the tank. You'll have to dodge some bracing back there as that's where the original spare carrier was located. While I agree with your doubts about the fill in the trunk thing, I'm a fan of mounting it under the fender. No exotic plumbing just a later model fill pipe adapted in with a support bracket. Here's a pic of my '36 roadster door, it's from a '46-8 Ford. I like it better than the aftermarket stuff and the contour fits the fender perfectly.
    Attached Images
    Last edited by Bob Parmenter; 01-04-2009 at 07:24 AM.
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink