Thread: changing rearend
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
01-07-2004 04:28 AM #1
CHR Member
- Join Date
- Nov 2003
- Location
- Huntsville
- Car Year, Make, Model: 34 Sedan/39 chevy
- Posts
- 86
changing rearend
I bought a 8'' ford rearend with 3.0 gears an had a 350 trans.
rebuilt for it, now I sold the 8'' an bought a 9'' Heidt's with 3.50
gears do I need to change something in my trans.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-07-2004 08:48 AM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
Not exactly sure what your thought line is here, but the trans doesn't care what rear you have in a broad sense. If you had a drive shaft already built you may want to check the rear joint is all. If you'd already gotten the correct speedo gear for the gear ratio and tire size you should already be set there as well.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build