Printable View
I am ready to make all the usual hookups to the engine (350 crate w/edlebrock carb, HEI distributor, and booster brakes) and need some information on where to hook-up:
1. the vacuum from the brake booster
2. the vacuum from the distributor
3. the oil sender
4. the temp sender
5. bat. to dist.
:confused:
http://good-times.webshots.com/photo...99708909XxCamn
brake booster vacuum should come from either the intake or the base of the carb
distributor vacuum should come from the front of the carb, On the Edelbrock carb you have, the highest port would probably be the one you want
Oil sender on the back of the block behind the distributor
Water temp sender on the intake manifold or on the side of the head.
Battery power to your distributor from the run side of the ignition switch.
I forgot to say thanks for any information.