Thread: What Is The Best Budget Roller Rocker

Tweet

Originally Posted by tango

The trouble with the stock stamped type non Rollor tip rockers is . They should be 1.50 but many times they can be any were from 1.42 to 1.52 . The only stamped rockers that are true 1.50 are the Crane Nitro-carb steel ones . Also I have removed stamped rockers with 40K miles that the tips were worn and not reuseable . The Comp cams Magnum rockers are the best of both worlds . But on a low budget 327 I am building I will us a set of long slot stamped rockers to save on the build . But the 355 street/ strip gets roller rockers .

the full roller arms are not all true ratio? i check them mid lift to make sure the pushrod is rigth length .you have to watch this .the crowers ss arm are the best i think. they can be rebuilt at the push rod cup were the comp can not then would be crane golds would be 2 on the list

Originally Posted by pat mccarthy

the full roller arms are not all true ratio? i check them mid lift to make sure the pushrod is rigth length .you have to watch this

What brand should I buy for my 327 build . I need a set of long slot stamped 1.50 rockers that dont break the bank ?

Originally Posted by tango

What brand should I buy for my 327 build . I need a set of long slot stamped 1.50 rockers that dont break the bank ?

try a set of ni-chem rockers? never used them sounds good 1.5 $130.www.competitonproducts.com. i use full roller rockers or stock for stock builds

Thanks for your input your ideas are helpful . I know that guys use nitro stamped rockers on stock class drag cars . They want to make sure they get the full lift of there class rule cams .

I like Scorpion.
All my dirt-burners love them.
We go 3-4 seasons on them.
They say they have a lifetime warranty on them.
If you shop the old evil bay you should be able to pick them up for about $185.