Thread: ford 8" rear
Results 1 to 6 of 6
LinkBack URL
About LinkBacks-
11-17-2007 06:29 PM #1
CHR Member
- Join Date
- Jun 2005
- Location
- pottstown
- Car Year, Make, Model: 23 t bucket
- Posts
- 347
ford 8" rear
i found a complete rear its out of a 69 stang, i removed the axles , do the backing plates fit over the axle bearing,or do i have to press the bearing off to get the backing plate off, i dont want to try to force it off ,never did a ford rear beforeGLENN
you can do it if you know how it works
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-17-2007 06:36 PM #2
CHR Member
- Join Date
- Jun 2007
- Location
- New Market
- Posts
- 2,584
the backing plates should fall off .. they are held on by the same bolts that hold the axels on .. and ive never seen a 69 with an 8 inch rear ..iv`e used up all my sick days at work .. can i call in dead ?
-
11-17-2007 06:54 PM #3
CHR Member
- Join Date
- Jun 2005
- Location
- pottstown
- Car Year, Make, Model: 23 t bucket
- Posts
- 347
thats what it came out off ,not saying its the original ...dont know..
thebacking plates aint falling off,ill try again tomarrowGLENN
you can do it if you know how it works
-
11-17-2007 07:05 PM #4
CHR Member
- Join Date
- Jun 2007
- Location
- New Market
- Posts
- 2,584
post a pic if you can .. if you can get all the bolts out of the chunk with a socket it is a 8 inch .. if it takes a boxed end wrench to get out a couple the it is a 9 inchLast edited by HOSS429; 11-17-2007 at 07:10 PM.
iv`e used up all my sick days at work .. can i call in dead ?
-
11-17-2007 07:07 PM #5
CHR Member
- Join Date
- Jun 2005
- Location
- pottstown
- Car Year, Make, Model: 23 t bucket
- Posts
- 347
i wii if i cant get it ,tomarrowGLENN
you can do it if you know how it works
-
11-17-2007 07:21 PM #6
CHR Member
- Join Date
- Mar 2007
- Location
- Mesa
- Posts
- 1,385
wait a while, more '69s will pop up that have 8 inchersWhat if the "Hokey Pokey" is what it's really all about? 
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project