Thread: chevy 4.3 v6 exhaust
-
10-24-2007 09:33 PM #1
chevy 4.3 v6 exhaust
I have never played with a v6 before.Is exhaust handled on a 6 the same as an 8?Do you go with the same size pipe,do you need to equalize the flow differently from side to side? Or do you just take 3 cyl. on each side and treat them like an 8 or is it more complex? thanks Phil
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-24-2007 09:36 PM #2
it a 350 just two less pistons i would not get nuts with it but if you done alot to it then go bigger tube sizeIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
10-26-2007 09:56 AM #3
thanks pat Do you wryte books about pontiacs or is that your brother?Seriosly,the v6 90 degree chevy do not seem to rev. like a v8, It appears done by 5500.Is that because of head ports,crank degree of firing or something else ,I DOHT KNOW ALL ABOUT THE DIFFERENCES BETWEEN 6 AND 8,I may be looking for something more complicated than it has to be. thanks hil the geezer
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project