Thread: Residual Pressure Valves
-
08-12-2007 11:54 PM #1
Residual Pressure Valves
I know the purpose of these devices however i am unsure as to which one to get.. Do i need to purchase 1 or 2 Residual Pressure Valves as the setup i'm currently running is discs on the front and drums on the back... I have looked up the wilwood site and they make one for discs or drums so i assume i need one of each? helP!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-13-2007 05:45 AM #2
If your master cylinder is above the level of the wheel cylinder/calipers you should only need the one for the drum rear. If it's a floor mount and below the wheel cyinders/calipers, you'll need one for the front, also... At least that's the general rule I go by...... Best to have a proportioning valve in the rear line, too.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
08-13-2007 06:17 AM #3
You will want 10 lb units on the drums, and 2 lb units on the discs, and only if your wheel cylinders are mounted higher than your m/c, as Dave said.
Don
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel