Thread: tpi tech gauge does anyone have them, need help!!!!

Tweet

Originally Posted by hottrodd57

don, I can't get to any of it,!!!! like I said, when i turn the ignition on ,the odometer comes on & shows 000000.5, when I hit the button it does nothing, I can't even get to step 1. where it is suppose to say "hello".
Could you get to any of the steps before you got ahold of the tech guy?

I am thinking the speedo is just junk. so far I am very disapointed with thr tpi tech gauge.& there service dept.

everything is connected corectly

Check your ground connection from the button.

You do have the button connected to the Blue wire and then to ground?

Also check continuity thru the button if you soldered the wires to the very small terminals on the button. It may have gotten too hot internally and no longer be functioning.

As has already been posted; you will probably have to go thru the procedure at the instructions at Step #5 and then go back to Step #4.

You are getting power to the speedometer since you do see a reading on the odometer when the ignition switch is turned on.