Thread: Need Help Wiring Tach
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
06-28-2007 05:24 PM #1
CHR Member
- Join Date
- Nov 2004
- Location
- East Lyme
- Car Year, Make, Model: 23 T-Bucket
- Posts
- 37
Need Help Wiring Tach
I have an old Radson Tach with one each - red, yellow, and green wires. The wires are not marked and I need to know where to connect them.
Thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-28-2007 05:30 PM #2
CHR Member
- Join Date
- Feb 2004
- Location
- Tucson
- Car Year, Make, Model: 39 Ford Coupe, 32 Ford Roadster
- Posts
- 2,334
Not familiar with that brand but the common wiring for tachs was:
yellow or white is the back light
red is switched 12VDC
green is the trigger (coil -)
black is ground
Take your ohm meter and see if there is continuity from the yellow
wire to the case....it may be grounded thru the case....somewhere
the thing has to be grounded!!!
mike in tucson
-
06-28-2007 06:34 PM #3
CHR Member
- Join Date
- Nov 2004
- Location
- East Lyme
- Car Year, Make, Model: 23 T-Bucket
- Posts
- 37
Thanks for the quick responses guys.
Harry F
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project