Results 1 to 14 of 14
LinkBack URL
About LinkBacksThreaded View
-
05-12-2007 02:32 PM #1
CHR Member
- Join Date
- Mar 2007
- Location
- Kenilworth
- Car Year, Make, Model: 67 Jaguar 420 G, 1940 Chevy Coupe
- Posts
- 15
Starter mounting clearance issues
I was mounting the starter (powermaster 9000) to the block of my 350 motor and ran into a problem.. the gear of the starter should have 1/16" clearance from the flywheel, but when I mounted mine it was engaged 1/8". I added the shims to the housing and it is now engaged only 1/16". I've included a photo for reference. Anyone have an idea on how I can correct this?
I've been mounting and remounting it for 3 days now... Any advice would be be welcome!!!!
Thanks in advance !!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!