Ok ,here we go......Got it all apart and here is what I discovered.The rear bearing race was not seated,there is no crush sleeve and the bearings were shot ,massive metal imbeading of the face of the bearing.
Here is the good news ,good ol step dad had a massive bearing puller to pull the rear pinion bearing right off and press in and out the old races.
I am going to the store monday to get the new bearing and races get it all back together and put the gear marking compound on there and see what I have The axels had some surface rust on them but the splines and bearing surface looked preety good for 40 year old axels.The bad news is the inside of the axel housings are full of yuk and muk.I am going to have to clean all of that out and flush ,flush,flush to get it clean inside.
i am going to post some pics soon tonight on the progress
Thnx