Thread: 7.5 chevy rearend
-
02-11-2007 05:28 PM #1
7.5 chevy rearend
I`m working on a chevy monza and I`m replacing the stock gears of 2.56 with a posi 3.42 out of a S-10. I found out the pinion has a larger bearing and the yoke spline is a different size.I`m assuming I have to replace the race to match the bearing size but I have no idea what to do about the yoke size. Any and all help will be great. Thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project