Thread: Broken 5/16 Bolt Posi Carrier
-
01-16-2007 07:08 AM #1
Broken 5/16 Bolt Posi Carrier
Looking for some input on how get bolt out holds center pin. What i had to do was drill small hole in side carrier blow it out with air. Mine was broke off at other end. It should not hurt case by drilling small hole above pin. Any input please. Thanks Ron
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-16-2007 08:05 AM #2
snap-on made a kit to get them out if you want to buy one
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project