Thread: valve guide boss
-
01-14-2007 08:12 AM #1
valve guide boss
On a small block chevy head, if the valve guide boss is cracked or broken, is this repairable? Im told you have to cut them down anyway for teflon guides, but how much would you remove. Thanks"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-14-2007 09:08 AM #2
yes you can cut it down for pc seals or run a guild liner in it 11/32 id/502 od
-
01-14-2007 09:17 AM #3
Thanks Pat."oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project