Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: How to read a caliper?
          
   
   

Results 1 to 11 of 11

Threaded View

  1. 12-20-2006 10:06 PM #3
    Frisco
    Frisco is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    Canton
    Car Year, Make, Model: 1931 Ford Roadster
    Posts
    46

    Quote Originally Posted by BigTruckDriver
    Any one know where I can get a printable scale of 1 inch,down to 32 "s or 64"s.Even converted to decimal would be good to.Thanks
    If you are asking about a chart; here are two links for both wall chart and pocket size charts.

    http://www.bghooke.com/brucehooke/Do...0(ver%202).pdf

    http://cgi.ebay.com/STARRETT-LARGE-W...QQcmdZViewItem

    You should be able to get the pocket size for free at a machine tool supply.

    If you are asking about a steel rule; that can be purchased at a machine tool supply. Can also be found in Sears and Lowes and Home Depot.
    Last edited by Frisco; 12-20-2006 at 10:09 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink