Thread: Radiator hoses
-
12-15-2006 06:01 PM #1
Radiator hoses
Hi everyone - am building a '46 ford/sb 350 chevy - and need to locate radiator hoses - do I go to a parts store with a pattern and try to match them or is there a place to have them custom made, or are there universal flexable after market products available. Thanks in advance, Bill
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-15-2006 06:12 PM #2
yes that is the way i do it. the parts store let me go in back to look it them and they do make some stuff thats bends that you can get at jeg's or summit or use header tubing weld it and put rubber hose on the ends so it can flex have done this with header tubing andSS tube and alum tube and had it buff
-
12-15-2006 06:15 PM #3
Many Thanks, Pat McCarthy
-
12-15-2006 06:49 PM #4
Same here, i just take old hoses and cut them and then tape them toghether to get the shape i need ,then go to the parts store and find one that matches, or you can do like pat says and make one out of pipe
The main function of your little toe is to make sure all the furniture in the house is in the right place.
the Official CHR joke page duel