I spoke to a painter/caricaturist today, and he suggested something rather novel---He said that he does all his work with automotive base colours, then clears over the work, but only has experience with painting sheet metal. His suggestion was to have a photo shop blow up the .jpg I have to the size I want, (about 17" tall), then have it plasma cut from a peice of 14 ga. stainless. He would then paint the stainless as I wanted, and clearcoat it. When I upholster the plywood cover, first put on the landau foam (1/8" thick), then lay the stainless peice where I wanted it to be on the cover, and use an exacto knife to cut the foam away in that area. Then put the white vinyl over the foam, and glue it down where the foam was cut away, to leave a 1/8" depressed area the size of the caricature. Then glue the painted stainless caricature down into the recessed area. That might work for me, but it sounds like a lot of work.