Thread: Filling Holes

Tweet

yes i have leaded .find some way to weld them lead is tricky but can be done . but i will tell you if you want to try get a big heavy duty soldering gun 200watts you will need to make them low so the lead as some place to hold on to. tap in with a punch.DO NOT GO NUTS. you need to tin the spots with the iron move it around with a small bit of lead till it is wet looking and then add lead if it drop thru it to hot . i would use solid solder wire and solder paste make sure you wash it all off. but you can wast every body panel if you do it wrong with a torch or a mig.weld them with a mig is the only right way.IMO