Thread: Rocker pins

Tweet

i would tap them and use some new studs that threads in the head but you can do it the pin way to. for me threading new stud in is how i would do it but if more then 4 studs are pulled up. then pull the heads off and fix them all. the steel stud will be harder than the iron head so by the time you get a hole thru the stud the pin hole may be sloppy in the iron and not helping lock the stud down with the pin so you will need to step drill the hole up for the roll pin size and could be a pain in the ass you may have a hard time getting at the side of them with a drill but you can tap them from the top of the head and work down .not work on the side of the head with a drill.