Threaded View
-
10-14-2006 01:41 PM #3
The next step is tricky. You can start out with a big peice of stiff cardboard for this step. It helps a lot to have a friend assisting you. The cardboard must be held against the front corner of the plywood "fin" that you have standing up in the center of the roadster cowl. The trailing edge of the cardboard should set about 3" in front of the door jamb at the point where the cardboard crosses the side of the cowl. The bottom must be carefully trimmed so that it conforms to the curvature of the cowl.Old guy hot rodder
The engine looks awesome, I like the low intake. That'll be some eye candy when the hood is popped.
1968 Plymouth Valiant 1st Gen HEMI